The Saramonic Vmic is a broadcast quality condenser microphone that
provides professional audio with DSLR cameras and camcorders. The Vmic
allows you to adjust level control (-10dB, 0dB, +20dB), high-pass
filter(150 Hz), and high-frequency boost(+6dB) to increase
intelligibility of dialogue. The detachable 3.5mm cable connects the
Vmic to the audio input of the camera, while the stereo headphone output
allows you to monitor the incoming audio. The shock mount system
provides isolation from vibration and mechanical noise.
Super-cardioid polar pattern.
Integrated shock mount system.
High pass filter (150 Hz).
High frequency boost (+6dB).
Three position level control (-10dB, 0dB, +20dB).
Headphone monitor output
1/8’’ audio output jack to camera
LED power on/low battery indicator
Wind shield included.
Lightweight all-mental construction.
Powered by two AA batteries
Polar Pattern: Stereo cardioid
Frequency Range: 35 Hz to 20 kHz
Signal to Noise Ratio Supercardioid: 75 dB
Sensitivity:-40dB +/- 1dB / 0dB=1V/Pa, 1kHz