THIS IS A USED ITEM

-VERY GOOD CONDITION-
THE CAMERA HAS SOME COSMETIC SIGNS OF USE
NOTHING TO EFFECT THE PERFORMANCE OF THE UNIT

THIS ITEM COMES WITH,
BATTERY
CHARGER
AND STRAP
FULLY TESTED

3 MONTH WARRANTY

13700 SHUTTER ACTUATIONS
ALL SHUTTER COUNTS ARE ROUNDED UP THE NEAREST 100 OR 1000
CAMERAS ARE ON DISPLAY IN A SHOW ROOM THEY CAN GO UP OVER TIME

Key Features
24.35 MP APS-C CMOS Sensor
PRIME III Image Processor
Anti-Aliasing Filter Simulator
3.2" 1.03m-Dot LCD Monitor
Full HD 1080p Video Recording at 30 fps
SAFOX11 27-Point AF, 25 Cross Sensors
ISO 100-51200, 8.3 fps Shooting
86k-Pixel RGB Exposure Metering
Built-In GPS, Compass, and AstroTracer
Shake Reduction & Pixel Shift Resolution

24.35 MP APS-C CMOS Sensor and PRIME III Processor
A large 24.35 MP APS-C CMOS sensor and PRIME III image processing engine work together to enable high-resolution imaging and full HD video recording with notable low-light sensitivity from ISO 100-51200. The image processor also contributes to a wealth of shooting speed for the camera, including a top full-resolution continuous shooting rate of 8.3 fps for up to 23 consecutive RAW images or 60 JPEGs and a maximum shutter speed of 1/8000 sec. This highly durable, advanced shutter mechanism employs a three-motor system that independently regulates the shutter, mirror, and diaphragm to minimize mirror shock for accurately-rendered images when shooting at higher frame rates.
Selectable Anti-Aliasing Filter
A unique and innovative mechanism allows you to toggle an anti-aliasing filter effect either on or off, providing support for both the high-resolution abilities of a filter-less design as well as advanced moiré protection. With the filter in the Off position, the camera is more prone to acquiring maximum sharpness, resolution, and detail from an image for the highest attainable image quality. When the filter position is set to either Type1 or Type2, an anti-aliasing simulator applies microscopic vibrations to the image sensor unit during exposure; working to create the same effect as an optical anti-aliasing filter. Having both options available extends the camera's versatility and allows personalized selection of the benefits best-suited to individual applications. Additionally, AA filter simulation settings can also be bracketed for times when the likelihood of moiré is unknown.
Pixel Shift Resolution and Diffraction Correction
For increasing the effective resolving power, reducing noise, and achieving a more refined color palette, Pixel Shift Resolution technology composited four sequentially recorded stills while shifting the image sensor in one pixel increments in each direction after each exposure. This allows each pixel to record its own unique set of RGB data, rather than having each pixel record only red, green, or blue values per exposure and de-mosaicing or interpolating this information to form a final image. Since no interpolation is used, truer colors and reduced noise is possible, as well as increased edge sharpness and apparent clarity. This mode is most effective when photographing stationary objects from a tripod due to the extended duration and precision required during the process.

Also helping to increase sharpness, a Diffraction Correction function offers an effective two stop improvement in regard to the effects of diffraction and other aberrations common to working with smaller aperture sizes. This technology is possible due to the heightened processing capabilities of the PRIME III engine, and can also be applied to imagery during in-camera raw file development.
SAFOX11 Autofocus System
The SAFOX11 autofocus system employs 27 distinct phase-detection points, including 25 cross-type sensors, to quickly and accurately acquire focus on subjects in a variety of lighting conditions. Three central points also cover an f/2.8 luminance flux to extended sensitivity when working in lighting conditions as low as -3 EV. Also benefitting autofocus performance, the 86k-pixel RGB exposure metering sensor, light source sensor, and AF assist light help to further refine the focusing accuracy despite working in challenging situations.

The AF-C (continuous AF) algorithm also benefits from the use of the exposure metering sensor, which aids in maintaining responsive and accurate tracking performance on moving subjects, especially when moving perpendicular to the camera. AF-S (single-shot AF) performance has also been increased and requires less redundant movement, or fine-adjustment hunting, prior to acquiring focus.
86k-Pixel RGB Sensor Exposure Metering
In addition to benefitting the AF performance of the K-3 II, the 86k-pixel RGB sensor also helps to ensure accurate and consistent exposure metering with a range of -3 to +20 EV. A Real-Time Scene Analysis System analyzes the scene and subject at hand, and employs exposure meter readings and both color distribution and color movement detection to produce an exposure capable of best-rendering subjects.
Sensor-Shift Type Shake Reduction
With the inclusion of a high sensitivity gyro sensor, in-camera sensor-shift type Shake Reduction (SR) works to minimize the appearance of camera shake by 4.5 EV steps when using any mounted lens. Ideal for working in low-light conditions or with longer lenses, since the image stabilization is located within the body, both past, legacy lenses as well as current Pentax lenses all receive the benefits of SR. This image stabilization system can also detect horizontal panning motion and compensate for the lateral movement during shooting.
GPS, Electronic Compass, and AstroTracer
A built-in GPS module and electronic compass allow you to geotag your imagery during shooting for plotting to interactive maps to track where and when your shots were made on Google Earth.

Also benefitting from the GPS module, as well as the Shake Reduction sensor-shift mechanism, the K-3 II features a unique AstroTracer function to better enable making long exposures of the nighttime sky. Using the GPS coordinates and orientation of the camera, the image sensor will shift during the course of an exposure in order to compensate for the Earth's rotation and prevent star trails from occurring; resulting in sharper, clearer imagery and alleviating the need for an optional equatorial mount.
Full HD 1080p Video Recording and Time Lapse Movies
Full HD 1920 x 1080 video recording is supported in multiple frame rates, including 60i, 50i, 30p, 25p, and 24p, in the high-quality H.264 format. HD 1280 x 720 video is also supported in 60p, 50p, 30p, 25p, and 24p frame rates. Audio can be recorded along with video using the built-in microphone or, additionally, a 3.5mm microphone terminal is available for use of an external mic.

Beyond standard movie recording, an interval timer can also be used for making time-lapse sequences, which can be saved at 4K resolution (3840 x 2160) and compiled into a Motion JPEG file for seamless playback. The interval timer allows you to record up to 2,000 consecutive frames with an interval of 2 seconds to 24 hours between each frame, and a 2 second to 24 hour time delay available. When compositing frames, you can use Additive, Average, or Bright settings to smooth the transitions between frames.
Body Design
A rigid magnesium alloy shell over a stainless steel chassis renders the K-3 II fully weather-resistant, cold-proof to temperatures as low as 14°F, and sealed against dust and moisture using 92 independent seals.
The optical pentaprism viewfinder offers 100% frame coverage and has a 0.95x magnification. Additionally, interchangeable optional focusing screens can be used depending on different focusing, viewing, and compositional needs.
A large 3.2" 1.03m-dot LCD monitor enables working in live view when shooting or recording movies, and also benefits clear image playback and menu navigation. The screen has adjustable brightness, contrast, and color settings, an air-gapless design, and an anti-reflective coating for easier viewing in bright conditions.
Dual SD memory card slots for greater storage flexibility and potential storage capacity when shooting.
The shutter mechanism has been tested for 200,000 actuations for ensured durability.
Dust Removal II function helps to maintain a clean, dust- and particle-free sensor surface.
USB 3.0 interface permits fast file transfers when connected to a computer.

USED Pentax K-3 II Digital SLR Camera Body w/ Battery Grip