Benro TSL08AN00 Slim Aluminium-Alloy Tripod with Ball Head
Part Exchange & Trade InClick here for a quote
Need some more questions answered? Enquire about this product
This TSL08AN00 Slim Tripod from Benro is constructed from Aluminium-Alloy, supports up to 4kg, and includes an Arca-type ball head with quick release plate. Designed to conserve space during storage and transport, the tripod measures 510mm long and 81mm wide when folded. Its 4-section legs each feature an independent spread, a 3-position angle lock, half-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 399mm to a maximum height of 1229mm or 1464mm with its push-and-pull, rapid center column fully raised.
Cameras, lenses, or sport optics that are compatible with a 1/4"-20 mount can be connected to the included quick release plate. The quick release plate can be attached or removed from the integrated, Arca-type clamp located at the top of the head's ball-and-socket joint by tightening or loosening the clamp's knurled, locking knob. While the top of the quick release plate features a rubberized, non-slip platform, dual retaining screws are provided along its underside. Those retaining screws help prevent the quick release plate and an attached camera from accidentally sliding off when the clamp it is placed on is opened.
By loosening the ball head's primary locking knob, the head's ball-and-socket joint can be quickly swiveled, angled, fully tilted, or returned to its upright position. Additionally, the primary locking knob controls the ability to pan the head 360°. For added versatility, the tripod's center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them.
A nylon, drawstring bag is provided for storage and transport.
Use and Handling
Supports up to 4kg
Push-and-pull center column with ballast hook for rapid camera, lens, or sport optic positioning
Can be set for a minimum height of 399mm to a maximum height of 1229mm, or 1464mm with center column fully raised
Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them
Legs each feature 4 sections, a 3-position angle lock, half-turn twist locks for rapid deployment, and can be independently spread
Legs can be locked at 21°, 55°, or 80° angles
Rubber feet help to enhance stability on a wide variety of surfaces
Built-in bubble level
Weighs 1.2kg, measures 510mm long and 81mm wide when folded
Hex key to adjust tension on leg hinges
Magnesium-alloy ball head with Arca-type quick release clamp
Aluminum-alloy quick release plate with 1/4"-20 mount; rubberized, anti-slip surface; and dual retaining screws that prevent the base plate from accidentally sliding off when the clamp it is placed on is opened
Drawstring bag for storage and transport